Removing axles from metal chassis.
Stroller Wednesday, 9/17/2014
I wanted to remove some axles from a metal chassis without damaging the axles so I ground down the metal tabs with a Dremel. Then I tried bending back the tabs with a small screwdriver. Now it looked like the axles were loose but they weren't. I thought about for a while then took the chassis into the bathroom and held it under scalding hot water in the sink. After a few seconds the axles came loose. I don't know if it was because the metal chassis expanded under the heat or the axles just got slippery anyway that's the way weird things happen here at the Stroller Garage....lol
Discussion
Log in to join the conversation or sign-up now
I have good results using really pointy heavy duty side cutters. I guess the hobby railroad guys use em to cut track. They hold an edge and get right in close to cut the tabs.