Harvest Dragway under construction
i finally started building my track. Harvest Dragway home of Enforcement Racing. its still under construction im hoping to be done by the end of the month maybe sooner.
the trrack is a downhill style its 14ft long, starting gate is 2ft in height.
this is the start to the starting gate
Discussion
, but is that phenolic that you are useing as the base for the runout ? ... nothing tougher !
I have no clue what it is i just happen to find out laying around at my dads house.
Lovin the track, cant wait to see the finished product and maybe eventual races at your place!
Lovin the track, cant wait to see the finished product and maybe eventual races at your place!
Thanks! It's coming along pretty good. Yeah I'm hoping to be a host one day. The only thing i need to figure out still is a finish line. I've read and seen just about all the posts here about finish lines i just need to figure out what i want.
Nice project! Consider putting 1" chock blocks under the flat straight-away to make like a bridge and less debris will blow up on the track.
Nice project! Consider putting 1" chock blocks under the flat straight-away to make like a bridge and less debris will blow up on the track.
Sounds good i will check into that
Harvest Dragway is complete
Looks good. my only suggestion would be to stagger the track so the track seam and the transition area don't line up. if the track ovelapped the transition seam it would make it smoother.
Looks good. my only suggestion would be to stagger the track so the track seam and the transition area don't line up. if the track ovelapped the transition seam it would make it smoother.
I see what your saying. I will see what i can do to get it like that.
Now that my track is up I've raced all weekend and have narrowed my garage down to my 20 fastest cars out of 82.
nice stuff K.H., looks like a good combination of pitch and flat...
i've been retired a while,[13 years], but is that phenolic that you are useing as the base for the runout ? ... nothing tougher !