MacGuyver start on the burnout track
model40fan Sunday, 5/12/2013
HOT WHEELS SIZZLER'S SPEED BRAKE AND ESSES TRACK SECTIONS USED FOR THE STARTER AND BURNOUT SECTIONS;
.
MAGIVER STARTER, REMOVE THE [4] LOCKNUTS FROM UNDERNEATH, LIFT, ROTATE 180*, DROP BACK IN THE SAME HOLES, THE STARTER IS NOW WITHOUT THE BURNOUT SECTION, CONNECTS DIRECTLY TO ORANGE TRACK; 
.
ORANGE TRACK ATTATCHED ;
.
PRESSING THE TWO WASHERS TOGETHER SLIGHTLY PULLS THE RELEASE PIN BACK, LAUNCHING THE RACERS ; 
.
A PAIR OF RACER OFF THE LINE ;
.
Discussion
Log in to join the conversation or sign-up now
THE MAG 5... starter made from 1/2" CTS fittings and tubing...
mock-up with drag tracks section...
press the u-bent wire towards the washer, the wire pivots, pulling on the dogleg, [lets the wire change angle] pulls out the hold pin, releasing the lexan [not shown] door... the 3 tapped holes are to attatch 2 strips of hot wheels track or [center hole] a drag tracks section... the elastic around the uprights is to temporarily hold back the lexan door's mount...