The Elevated Voxxer Super Stock Series
Saturday, February 7th, 2026
After a very eventful year here at Elevation...its time to roll out The SuperStockSeries sponsored by Voxxer Racing! This first event will consist of 3 different weight classes using Hot Wheels mainline only.
30g Class
35g Class
40g Class
No tubes or variations of altered wheel sets. Use mainline, Hot Wheels wheel sets only on uncut axles and no cut or altered axle heads. Of course, Polish wax sand etc do all your wheel work. The diameter of the wheel swap must match original stock car and mounted an original position. No alterations of any kind are allowed on the visible portions of the car. You may add up to 3 g of weight to bring it up to class specs. So a 32g car can have 3g to run in the 35g Class. But it's not to exceed the class weight.
Rules & restrictions
- Modified entries only
- 30..35..40g Classes
- NO LIMIT ON ENTRY
- Unaltered Hot Wheel sets only
- Any Lube
- $5.00 per car entry NoLimit
Dates & deadlines
All entries must be received by the host before Saturday, 1/31/2026. Racing is scheduled for Saturday, 2/7/2026. Results will be posted on or after that date as is convenient for the host.
How to enter
Send your entries to:
Elevation Diecast Racing
808 22nd St SW
Loveland CO 80537
Include at least $10.00 for return shipping if you want your entries back. Entries not getting returned will be given to the winner as part of the prize. Entries outside the US please include at least what it cost to send your cars. IF YOU DONT HAVE SLIPS PRINT ONE OUT OR WRITE IT ALL OUT ON PAPER.....THIS IS HOW I TRACK YOUR ENTRIES
Include a Race Entry ID slip with your entry
Track
Racing will be on the MileHighRaceway. View track profile and specs
Race format and scoring
This will be a timed event. Every entery will race . Any racer that is disqualified will racer but not advance past the 1st round.
The car that wins the final race will be declared the winner. Race host has final decision in all races.
Penalties/DNF
There will be no grace given to any car. So make sure your scale is correct.
If a car fails to meet any of the restrictions listed above, the car will not qualify for victory. Offending cars will still race in the 1st round.
Cars that fail to run or fit on the track, or that happen to break during racing, will forfeit their matches. Cars that arrive broken will attempt to be minimally repaired before the racing begins. Cars that break during racing will not be repaired or replaced.
Prizes
1st place Trophy for each class and medals for 2nd place plus prize packs
Discussion
Yes please.
- KungPowChicken — ElevationDiecastRac1ng
- Why are people confused. Mainline cars, that must completely look like they are straight out of the pack, except for drilled out rivets and invisible mods. I think it's a great new racing class. — VariatSkunkWorks
- Can I reduce weight if I do it so it's not in any way visible? My car, stock, is .14grams over. — VariatSkunkWorks
It says the cars must be mainline, but can it be any year mainline or only recent years?
- Can be any mainline that was issued on a card, 5, 9, 10, 20 pack, Color Revealers or Color Shifter. No Premium car or Wheels — VoxxerRacing
- Thank you — ManiacMotorsports
If someone has a smoking hot car in the 35gm class, would it be able to race in the 40gm class as well? Or 30 to 35?
- I think the cars have to be one of the 3 weights — ManiacMotorsports
- One different car per weight class. — VoxxerRacing
I really like the advanced notification. I think I'm going to be able to give this one a go!
A few questions for ya,
Sanding the base is considered modifing the exterior? 1968-72 have numerous castings in these weight classes. If I chose to run one of them are repro wheels ok? I can use the wore out originals if needed. They also have FACTORY bearings (plastic not metal), I read the rules 3 times, it does not mention them at all. Are we required to use all of the original parts? Can I lose the interior? Thanks in advance.
- All Hot Wheels original parts. — VoxxerRacing
- If you see the part from any angle, example interior, that part must stay. — VoxxerRacing
- No Unopened Stock cars allowed, in the rules, modified, as in opened cars - rivets removed, are allowed. — VoxxerRacing
- Zero, Zip and Nada modifications allowed, written, interpreted, in spirt are not allowed - except for removal of rivets — VoxxerRacing
- FOR THIS RACE, any HW Main line uncut axle and head, from '68 to present is legal. — VoxxerRacing
- We definitely look forward to having red line salvage inc back at Mile High — ElevationDiecastRac1ng
1. Car comes with regular wheels: can you swap the for skinnies or vice versa so long as they are the same diameter?
2. Say a car is 40.5g stock, can you make it .5g lighter to qualify for the 40g class?
3. Can we glue axles?
4 do we have to use the interiors?
- Any HW main lines stock uncut axle and head are allowed. Any " modifications " of axles and wheels ... cut, polish sand .. etc allowed. — VoxxerRacing
- Yes, gluing axles in original stock position is allowed. All wheels sets must be in stock positions. — VoxxerRacing
- If you see interiors or any part on original car, from any angle, must stay/on in car. If you see it in the bubble, it must stay. — VoxxerRacing
I'm in